This handy calculator allows a person to approximate the cost of a leak and the potential money that could be saved by repairing the leak in a set number of days. All you have to do is enter the steam pressure ( valid for 0.5 to 250 psig or 0.034 barg to 17 barg), the orifice/leak size (valid up to 1 inch or 25.4 mm) and the cost of your steam. Also, note that this calculation does not include the cost of the condensate that is lost which is an additional savings for getting the leak repaired.

This application allows you to perform the following calculations in both USCS and metric units:

1. The steam loss rate from a leak in a steam pipe (lb/h and kg/h) and the cost of the leak per hour

2. The total steam loss (klb = 1,000 lb and kkg = 1,000 kg) and the cost of the leak over a duration of days selected, up to 999 days.

Upon his discovery, Sasquatch immediately tried to hide the device behind his back and could be heard muttering “Uh oh Steve not gonna be happy about this”. The Sasquatch then approached our source and said “Gimme picture you took of iSlate”. Notice he he called the device an “iSlate”, this confirms the many rumors we have heard so far that the Apple tablet will be called the iSlate.

The anonymous source than ran to his car and got away unscathed with his camera. Of course we cannot totally confirm that our source’s story is true or the picture is genuine.

***NOTE:   THIS APPLICATION HAS NOT BEEN TESTED ON THE iPod Touch — IT HAS ONLY BEEN TESTED ON THE iPhone 3GS***

This application allows you to perform the following calculations:

DC Circuits:  Calculate amps using HP, amps using kW, kW and HP

AC 1 Phase:  Calculate amps using HP, amps using kW, amps using kVA, kW, kVA and HP

AC 2 Phase 4 Wire:  Calculate amps using HP, amps using kW, amps using kVA, kW, kVA and HP

AC 3 Phase 3 Wire:  Calculate amps using HP, amps using kW, amps using kVA, kW, kVA and HP

Voltage Drop:  Enter the length and amperes, select the circuit type, conductor material and wire gauge

Power Factor Correction:  Calculate the required capacitor kVA based on the load, your existing power factor and the corrected power factor

Also included is a reference for 3 phase motor starters at 230 and 460V.  The horsepowers available are 0.5 hp to 150 hp.

Please leave feedback regarding this application at this site.  We will take this information into account for the future updates.

The African American History App shows a daily update of African American or Black American History that specifically discusses birth dates, events and accomplishment in the United States.

• African American History is the portion of American History that specifically discusses the African American or Black American ethnic group in the United States.
• Most Africa Americans are descendants of captive Africans held in the United States from 1619 to 1865.
• Black from the Caribbean whose ancestors immigrated, or who themselves immigrated to the U.S., also traditionally have been considered African American.

Check it out here.

***NOTE:   THIS APPLICATION HAS NOT BEEN TESTED ON THE iPod Touch — IT HAS ONLY BEEN TESTED ON THE iPhone 3GS***

Here is a quick and handy calculator that will determine the required pipe internal diameter for a given flow rate and velocity requirement.  All you have to do is enter the flow rate, select the flow rate units and then select your low and high velocities.  Note that the metric flow rate velocities are in m/s and the USCS is in ft/s.

You have a choice of the following units for the flow rate:  ft^3/s, ft^3/min, ft^3/h, gal/min, gal/h, gal/dy, MM gal/dy (millions of gallons), L/h, L/min, L/s, m^3/h.

Please leave any feedback regarding this application in the comments.  We will take this information into account for the future updates.

Pipe Sizer